Project Director – Power Generation (CCGT) | Tulsa, OK or Houston, TX | $151K–$200K + Bonus

⚡ Project Director – Power Generation (CCGT Focus)

📍 Locations: Tulsa, OK or Houston, TX (On-site / Hybrid flexibility may vary)
🏭 Industry: Oil & Energy / Power Generation
🎓 Education: Bachelor’s Degree in Engineering (required)
💼 Experience Level: Mid–Senior (8+ years)
🚫 Visa Sponsorship: Not available
🚚 Relocation: Assistance available
💰 Compensation: $151,000 – $200,000 base + benefits + incentives
🕓 Employment Type: Full-Time | Permanent

🌟 The Opportunity

An established leader in the power generation and energy infrastructure sector is seeking an experienced Project Director to lead large-scale Combined Cycle Gas Turbine (CCGT) power projects across the United States.

This role offers the opportunity to oversee gigawatt-scale EPC projects that shape the future of clean and efficient energy. You’ll lead multidisciplinary teams, manage complex project lifecycles, and deliver results in fast-paced, high-stakes environments.

If you have deep CCGT experience and thrive on managing complexity and innovation, this is an exceptional opportunity to make an impact at scale.

🧭 Key Responsibilities

Project Leadership & Delivery

• Lead and oversee large-scale power generation projects, including combined and simple cycle plants.

• Manage all phases of the EPC (Engineering, Procurement, Construction) lifecycle — from design through commissioning and closeout.

• Drive project delivery to meet schedule, budget, and quality targets, identifying and mitigating risks proactively.

Team & Stakeholder Management

• Oversee and coordinate cross-functional teams of 35–50 internal staff and 30–40 external vendors.

• Foster collaboration across engineering, project controls, commercial, and construction disciplines.

• Serve as the primary liaison for executive stakeholders, providing clear communication, leadership, and motivation throughout project execution.

Strategic & Technical Execution

• Ensure project alignment with organizational goals, performance metrics, and regulatory standards.

• Monitor and manage project scope, critical paths, and risk assessments.

• Drive continuous improvement, leveraging data, analytics, and lessons learned for future efficiency.

🎓 Qualifications

Required

✅ Bachelor’s Degree in Engineering (Mechanical, Electrical, Civil, or related).
✅ Minimum 8 years of experience in engineering, project management, project controls, or operations within the Oil & Gas or Power Generation sector.
✅ Demonstrated experience leading Combined Cycle Gas Turbine (CCGT) projects — this is mandatory.
✅ Proven ability to deliver large, complex, multidisciplinary projects (>1 GW) successfully.
✅ Strong leadership, communication, and stakeholder management skills.
✅ Ability to operate effectively in dynamic and ambiguous environments, adapting to changes in design, scope, or execution.

Preferred

⭐ PMP Certification and/or Professional Engineer (PE) license.
⭐ Familiarity with project management tools such as Oracle Primavera, Microsoft Project, and Power BI.
⭐ Experience with technical engineering and project controls in large-scale energy projects.
⭐ Broad industry network and understanding of emerging energy technologies.

💡 What You’ll Bring

• A proven ability to lead with confidence, clarity, and collaboration.

• Strong analytical and organizational skills with an eye for detail.

• A leadership style that inspires cross-functional teams to excel under pressure.

• A results-driven mindset focused on safety, quality, and operational excellence.

🌍 Why This Role Matters

This is more than just a project leadership role — it’s an opportunity to help shape the next generation of energy infrastructure. You’ll be joining an organization at the forefront of sustainable, large-scale power solutions, managing transformative projects that keep industries and communities running.

🧩 Candidate Snapshot

• Experience: 8–15 years in energy or large-scale industrial projects

• Specialization: Combined Cycle Gas Turbine (CCGT) projects

• Certifications: PMP preferred | PE license a plus

• Software Skills: Oracle Primavera | MS Project | Power BI

• Location: Based in Tulsa, OK or Houston, TX (relocation assistance available)

Ready to lead the charge in next-generation energy projects?
Bring your CCGT expertise, leadership vision, and project excellence to a role where your work powers progress.

Field Service Engineer | $65K–$75K | Industrial Printing Technology | Greensboro, NC

Field Service Engineer

📍 Location: Greensboro, North Carolina
💼 Employment Type: Full-Time
💵 Base Salary: $65,000 – $75,000/year
🎁 Benefits: Full benefits package included
🚚 Relocation Assistance: Not available
📈 Bonus/Commission: Not applicable
🕒 Overtime Eligible: No

Be the Technical Backbone of Innovation

Are you ready to put your hands-on engineering skills to work in a dynamic, customer-facing environment? A global manufacturer in high-end printing technology is seeking a Field Service Engineer to support its cutting-edge single-pass inkjet presses in the corrugated packaging space. Based primarily at a client site in Greensboro, NC, this role is your chance to become the go-to expert in keeping advanced digital print systems running at peak performance.

You’ll play a pivotal role in installation, troubleshooting, on-site maintenance, and customer training, ensuring optimal performance of next-gen printing systems. If you thrive in an environment where precision meets people skills, this is the challenge you’ve been looking for.

🔧 What You'll Do

Technical Expertise & Support

• Lead equipment installation from setup through full operational acceptance

• Support customers during production ramp-up phases and provide hands-on training to operators

• Diagnose and resolve mechanical and software issues on-site

• Ensure optimal part management, including return processes and inventory accuracy

• Stay connected with technical teams for escalation and issue resolution

Customer-Focused Service

• Communicate effectively with clients to address concerns and resolve issues quickly

• Proactively maintain and improve customer relationships by delivering reliable, professional service

• Ensure each service visit leaves the site better than you found it

Documentation & Continuous Improvement

• Maintain precise service activity logs and troubleshooting reports

• Complete and submit daily timecards and accurate expense reports

• Follow a clear path of development toward becoming an Expert Print Consultant and Basic Operator Trainer

• Complete self-paced training programs (including remote and international sessions) on schedule

Travel & Administration

• Primarily based in Greensboro, but occasional travel—domestic and international—may be required

• Book travel proactively to ensure cost-effective accommodations and transportation

• Submit all expenses in a timely manner following travel

🛠️ What You Bring

• Associate degree required; bachelor's degree preferred—or equivalent experience

• 2+ years of experience in equipment installation, electrical/mechanical repair, or field service

• Solid experience in technical support, diagnostics, and troubleshooting

• Prior exposure to industrial inkjet and/or pre-press technologies is a major plus

• Valid driver’s license and ability to travel as needed

• Ability to work independently, manage time effectively, and remain calm under pressure

• Physically fit to lift up to 50 lbs and agile enough to work in tight, technical environments

• Familiarity with Microsoft Word, Excel, email, and web-based software tools

• Willing to occasionally work non-standard hours, including weekends

• Prior experience with similar equipment from manufacturers like HP, EFI, Fujifilm, Barberan, Canon, or Konica Minolta is highly valued

🏅 Preferred (but Not Required) Experience

• Successful management of large machinery installations

• Experience working in fast-paced industrial or print technology environments

• Demonstrated history of independently solving complex technical issues

🚀 Why This Role?

• Be a key player in delivering cutting-edge printing technology

• Join a forward-thinking company that invests in your technical growth and training

• Enjoy the variety of working on-site with clients while developing deep product expertise

• Gain exposure to international best practices and advanced technologies

Note: The employer is not disclosed in accordance with application policies. Do not repost or share company name unless engagement occurs.

Electrical Engineer | Industrial Power & Control Systems | Alcoa, TN

Position: Electrical Engineer

Location: Alcoa, Tennessee, United States
Travel: Not specified
Employment Type: Full-Time
Compensation: $80,000 - $105,000

About the Role

Our client is seeking an Electrical Engineer to join their Tennessee Operations facility. This role will focus on providing engineering support for maintenance and operations. The successful candidate will assist in safety, restoring product flow, solving recurring design and process issues, and driving improvements in equipment and process data analysis. The engineer will also oversee the implementation of capital projects, major repairs, and maintenance projects, as well as provide process engineering support as needed.

Key Responsibilities

• Provide technical support for operations and maintenance, focusing on safety and product flow.

• Analyze equipment and process data to identify areas for improvement and implement solutions.

• Manage, develop, and implement capital projects, maintenance projects, and repairs.

• Develop and design electrical systems for industrial equipment, including transformers, switchgear, transmission lines, and sub-stations.

• Troubleshoot and maintain industrial electrical power and control systems and equipment.

• Collaborate with other engineers and technicians to implement engineering solutions and improvements.

• Oversee the activities of craft personnel, ensuring safe work practices and compliance with safety standards.

• Manage external vendors providing electrical design and support functions.

• Lead and manage electrical projects, from design through installation and commissioning.

• Contribute to continuous improvement efforts in manufacturing operations using lean manufacturing principles.

What We’re Looking For

Basic Qualifications:

• Bachelor’s degree in Electrical Engineering or a related field from an accredited institution.

• At least 3 years of experience in electrical engineering, preferably in a manufacturing environment.

• Working knowledge of manufacturing processes and principles.

• Must be legally authorized to work in the United States.

Preferred Qualifications:

• 5 years of experience in electrical systems and manufacturing processes.

• Experience with high-voltage electrical equipment, design, application specifications, maintenance, and failure analysis.

• Proficiency in AutoCAD or similar CAD software.

• Strong background in electrical engineering, including industrial power and control systems, transformers, switchgear, and substations.

• Experience with capital project estimation, justification, management, and installation.

• Familiarity with electrical engineering safety standards, codes, and industry specifications.

• Knowledge of world-class manufacturing techniques such as Lean, JIT, SPC, and TQM.

• Strong problem-solving, creative thinking, and communication skills.

• Experience managing and executing electrical projects, including design, installation, and commissioning.

Compensation

• Base Salary Range: Not disclosed

This is a great opportunity to contribute to a modern and innovative manufacturing facility, where you'll play a key role in advancing operational efficiency and engineering practices.