Senior Electrical and Controls Engineer opportunity supporting capital projects and manufacturing automation across multiple U.S. locations. Hybrid role with $120,000–$160,000 salary and 40–60% travel.
Software Integration Engineer (Mid/Senior) – TS/SCI Full Scope Poly – Maryland or Utah
Software Integration Engineer (Mid/Senior) – TS/SCI Full Scope Poly
📍 Locations: Maryland or Utah
🏢 Work Arrangement: 100% Onsite
💼 Employment Type: Full-Time
🔒 Security Clearance Required: Active TS/SCI with Full Scope Polygraph (NSA Preferred)
🇺🇸 Citizenship: U.S. Citizen Required
🚫 Visa Sponsorship: Not Available
🚚 Relocation Assistance: Available
💰 Compensation: $100,000 – $200,000 Base Salary
Overview
A leading government technology contractor is seeking Software Integration Engineers (Mid-Level and Senior-Level) to join a mission-critical Site Reliability Engineering (SRE) team supporting highly secure government environments.
These positions focus on enterprise-scale monitoring, automation, software integration, operational tooling, and infrastructure reliability. Candidates will work across Linux-based environments while supporting mission operations through automation, observability, resiliency engineering, and performance optimization.
This role is ideal for engineers who enjoy solving complex operational challenges, automating infrastructure, and improving system reliability within highly secure environments.
Key Responsibilities
Site Reliability Engineering (SRE)
Support mission-critical infrastructure and operational tooling.
Improve system reliability, resiliency, and operational efficiency.
Develop automation and monitoring solutions.
Support enterprise-scale observability initiatives.
Software Integration & Deployment
Support software integration activities across mission environments.
Configure and troubleshoot customer-facing applications and use cases.
Participate in infrastructure deployments and system upgrades.
Manage software deployment workflows and integrations.
Linux Administration
Administer and support Linux-based environments.
Perform system maintenance, troubleshooting, and optimization.
Support multiple Linux distributions across operational environments.
Note: Candidates should expect to spend approximately 50% of their time initially performing Linux administration while becoming familiar with supported systems and environments.
Automation & Configuration Management
Develop and maintain automation using:
Salt
Ansible
Improve operational efficiency through infrastructure automation.
Support configuration management initiatives.
Monitoring & Observability
Build and maintain monitoring solutions utilizing:
Nagios
Thruk
Prometheus
Splunk
Grafana
Collaboration
Partner with engineering and operations teams.
Troubleshoot mission-critical issues.
Improve reliability, performance, and scalability.
Support continuous improvement initiatives.
Required Qualifications
Security Requirements
✔ Active TS/SCI Clearance
✔ Active Full Scope Polygraph (NSA Preferred)
✔ U.S. Citizenship Required
Linux Administration Experience
Strong experience supporting one or more of:
Red Hat Enterprise Linux (RHEL)
CentOS
Rocky Linux
SUSE Linux Enterprise Server (SLES)
Ubuntu
Experience with:
Linux system administration
System troubleshooting
Operational support
Infrastructure maintenance
Programming & Scripting
Experience with one or more of:
Python
Bash
C
Highly Desired Technical Skills
Monitoring & Observability
Nagios
Thruk
Prometheus
Splunk
Grafana
Automation & Configuration Management
Salt
Ansible
Development & Collaboration Tools
GitBucket
Jira
Confluence
Workload & Resource Management
Slurm
Must-Have Requirements
Clearance
✅ Active TS/SCI Clearance
✅ Active Full Scope Polygraph
Linux Expertise
✅ Linux System Administration
✅ Linux Troubleshooting
Scripting & Automation
✅ Python, Bash, or C
Technical Skills
✅ Monitoring & Operational Support
✅ Infrastructure Troubleshooting
Soft Skills
✅ Strong Problem-Solving Skills
✅ Ability to Work in Fast-Paced Mission Environments
✅ Strong Team Collaboration Skills
Screening Questions
Do you currently hold an active TS/SCI clearance with a Full Scope Polygraph?
Was your Full Scope Polygraph issued by NSA?
When was your most recent Full Scope Polygraph completed?
How many years of Linux administration experience do you have?
Which Linux distributions have you supported (RHEL, CentOS, Rocky, Ubuntu, SLES)?
Which scripting or programming languages have you used professionally (Python, Bash, C)?
Do you have experience with monitoring platforms such as Nagios, Prometheus, Grafana, or Splunk?
Have you worked with automation tools such as Salt or Ansible?
Do you have experience supporting Site Reliability Engineering (SRE), DevOps, or operational infrastructure environments?
Are you willing to work onsite full-time in Maryland or Utah?
Ideal Candidate Profile
The ideal candidate will:
Hold an active TS/SCI Full Scope Polygraph.
Possess strong Linux administration skills.
Have experience supporting enterprise monitoring and automation platforms.
Enjoy troubleshooting highly complex operational environments.
Be comfortable working within Site Reliability Engineering (SRE) frameworks.
Have experience developing automation solutions and improving operational efficiency.
Demonstrate curiosity, initiative, and a continuous learning mindset.
Thrive in highly collaborative mission-focused environments.
Candidate Snapshot
Requirement
Details
Clearance
Active TS/SCI + Full Scope Poly
Citizenship
U.S. Citizen
Experience Level
Mid-Level to Senior
Linux Expertise
RHEL, CentOS, Rocky, Ubuntu, SLES
Scripting
Python, Bash, or C
Automation
Salt, Ansible
Monitoring
Nagios, Prometheus, Splunk, Grafana
Environment
Site Reliability Engineering (SRE)
Location
Maryland or Utah
Work Arrangement
100% Onsite
Travel
None
Compensation
$100K – $200K
Relocation
Available
Why This Opportunity?
Mission Impact
Support highly secure government environments responsible for critical national missions.
Modern Engineering Environment
Work with leading technologies across:
Site Reliability Engineering
Automation
Observability
Linux Infrastructure
Enterprise Monitoring
Technical Growth
Gain exposure to advanced operational tooling, large-scale monitoring environments, and infrastructure automation initiatives.
Strong Benefits Package
3 Weeks PTO
11 Federal Holidays
Medical & Dental Coverage
Life Insurance
STD & LTD Coverage
401(k) with Company Match
Long-Term Career Growth Opportunities
This opportunity is ideal for a Software Integration Engineer, Site Reliability Engineer (SRE), Linux Systems Engineer, DevOps Engineer, Platform Engineer, Infrastructure Engineer, or Automation Engineer with an active TS/SCI Full Scope Polygraph looking to support mission-critical government operations.
Controls Engineer – Waukesha, WI
Controls Engineer
📍 Location: Waukesha, Wisconsin
🏭 Manufacturing Environment
💼 Full-Time | Onsite
🚚 Relocation Assistance: Available
🚫 Visa Sponsorship: Not Available (Current or Future Sponsorship Not Supported)
Overview
A global manufacturing leader is seeking a Controls Engineer to support plant operations through the design, development, implementation, and troubleshooting of automated manufacturing and testing systems.
This role is ideal for an experienced controls professional who can independently design PLC systems from scratch, support production equipment, develop testing solutions, and drive continuous improvement initiatives across manufacturing operations.
Key Responsibilities
Controls & Automation Engineering
Design, program, and troubleshoot PLC and HMI systems.
Develop testing protocols, data collection programs, and test equipment specifications.
Support production equipment, electrical systems, and automated test platforms.
Develop interfaces between SQL databases and production systems.
Support installation, validation, commissioning, and maintenance of manufacturing equipment.
Manufacturing Support
Troubleshoot equipment and controls issues to minimize downtime.
Perform root cause analysis and corrective actions.
Support continuous improvement, Lean, and Six Sigma initiatives.
Identify and implement process improvements to improve productivity and quality.
Project Engineering
Lead or support capital equipment projects.
Develop Capital Appropriation Requests (CARs).
Create project goals, budgets, schedules, and work breakdown structures.
Support change management initiatives using structured methodologies such as ADKAR.
Safety & Compliance
Ensure compliance with OSHA and electrical safety requirements.
Identify and mitigate safety risks associated with testing and manufacturing equipment.
Promote a zero-incident safety culture.
Required Qualifications
Education
Bachelor’s Degree in Engineering from an accredited institution.
Experience
Minimum 5 years of Controls Engineering or Test Engineering experience in a manufacturing environment.
Experience designing PLC systems from the ground up.
Experience supporting automated production and testing equipment.
Technical Skills
PLC Programming
HMI Programming
SQL Database Integration
Rockwell Automation Software:
RSLogix 5
RSLogix 500
RSLogix 5000
Studio 5000
FactoryTalk View ME
FactoryTalk View SE
Visual Basic / Visual Studio
Microsoft Applications
Must-Have Requirements
✔ Bachelor's Degree in Engineering
✔ 5+ Years Controls/Test Engineering Experience
✔ Ability to Design PLC Systems from Scratch
✔ Rockwell Automation Software Experience
✔ PLC & HMI Programming Experience
✔ Understanding of Safety Systems Design
✔ Experience Supporting Manufacturing Equipment & Test Systems
✔ No Current or Future Sponsorship Requirements
Preferred Qualifications
NI LabVIEW
NI TestStand
Ignition (SCADA)
Lean Manufacturing
Six Sigma Methodologies
Root Cause Analysis (8D, PFMEA, A3, Pareto, Control Charts)
Project Management Experience
Ideal Candidate
The ideal candidate is a hands-on Controls Engineer with strong manufacturing automation experience who can independently design and support PLC-based systems while driving plant efficiency and reliability.
They will have:
Strong Rockwell Automation expertise.
Experience developing controls for production and test equipment.
Ability to troubleshoot complex electrical and automation systems.
Strong SQL and programming capabilities.
Experience implementing continuous improvement initiatives.
Excellent collaboration and problem-solving skills.
Candidate Snapshot
Requirement
Details
Education
Bachelor's Degree in Engineering
Experience
5+ Years Controls/Test Engineering
Industry
Manufacturing
Seniority
Mid-Senior Level
PLC Design
Must Build PLCs from Scratch
Rockwell Experience
Required
Travel
None
Relocation
Available
Sponsorship
Not Available
Screening Questions
Can you design and build a PLC system from scratch?
Do you have at least 5 years of Controls/Test Engineering experience?
Do you hold a Bachelor's Degree in Engineering?
Do you have experience with Rockwell software (RSLogix, Studio 5000, FactoryTalk)?
Do you have PLC and HMI programming experience?
Have you supported the design, development, installation, and troubleshooting of production equipment?
Do you have experience with Visual Studio, SQL, and Microsoft applications?
Are you authorized to work in the U.S. without current or future sponsorship?
Nice-to-Have Experience
NI LabVIEW & TestStand
Ignition SCADA
Lean / Six Sigma tools
Capital project execution
Manufacturing test system development
Change management methodologies (ADKAR)
Why Consider This Opportunity?
Join a global manufacturing organization with a strong reputation for innovation and stability.
Work on advanced automation and testing systems.
Drive impactful plant-wide improvements and modernization projects.
Excellent career growth opportunities within engineering and operations.
Relocation assistance available for qualified candidates.
Regional Smart Manufacturing Senior Engineer – IN, IA or NE
Regional Smart Manufacturing Senior Engineer
📍 Location: Hammond, IN – Eddyville, IA or Blair, NE
💼 Type: Full-Time
✈️ Travel: Up to 40%
💰 Salary: $120,000 – $140,000 + Bonus
🚚 Relocation Assistance: Available
🚫 Visa Sponsorship: Not Available
Overview
A global food manufacturing organization is seeking a Regional Smart Manufacturing Senior Engineer to lead and deliver projects focused on automation, process optimization, manufacturing technology, and smart manufacturing initiatives across multiple production facilities.
This role will drive projects from concept through design, pilot testing, implementation, commissioning, value realization, and project closeout while providing technical leadership in manufacturing innovation and continuous improvement.
Key Responsibilities
Lead Smart Manufacturing and automation projects across multiple facilities.
Evaluate and implement new manufacturing technologies to improve efficiency, quality, and cost performance.
Manage projects through design, plant trials, startup, commissioning, and sustainment.
Utilize scientific methods, experimental design, and data analysis to evaluate opportunities and solutions.
Drive process optimization, raw material utilization improvements, and manufacturing performance enhancements.
Develop project charters, protocols, reports, and value-tracking metrics.
Collaborate with cross-functional teams to identify and implement best practices.
Support innovation efforts and identify intellectual property opportunities.
Manage multiple projects simultaneously while ensuring successful execution and delivery.
Required Qualifications
Bachelor’s Degree in Engineering or related technical field.
Minimum 4+ years of relevant engineering experience.
Experience with:
Project Management
Experimental Design
Data Analysis & Interpretation
Manufacturing Process Improvement
Technical Documentation
Ability to travel up to 40%.
Preferred Qualifications
Experience in:
Plant Operations
Process Engineering
Project Engineering
Process Controls & Automation
Manufacturing Technology
Production Excellence
Strong project portfolio management experience.
Automation and technology development expertise.
Experience within starches, sweeteners, texturizers, food ingredients, or related manufacturing environments.
Ideal Candidate
The ideal candidate is a hands-on manufacturing engineer with strong project management and automation experience who can lead technology-driven improvement initiatives across multiple production facilities.
They will have:
5–7+ years of manufacturing or process engineering experience.
Strong automation and smart manufacturing knowledge.
Experience implementing new technologies in plant environments.
Strong analytical and data-driven decision-making skills.
Ability to manage multiple capital or process improvement projects simultaneously.
Excellent communication and cross-functional leadership capabilities.
Candidate Snapshot
Requirement
Details
Experience
5–7+ Years
Seniority
Associate
Education
Bachelor's Degree
Industry
Food Manufacturing / Process Manufacturing
Travel
Up to 40%
Relocation
Available
Bonus
Yes
Why This Opportunity?
Lead high-impact Smart Manufacturing initiatives.
Work with emerging automation and manufacturing technologies.
Drive innovation across multiple production facilities.
Strong compensation, bonus potential, and relocation support.
Opportunity to influence operational excellence and manufacturing transformation on a regional scale.
Controls Engineer – Orlando, FL | PLC, Automation & System Integration
Controls Engineer
📍 Location: Orlando, Florida
🏢 Work Model: Onsite – 5 Days/Week
💼 Employment Type: Full-Time
💰 Compensation & Benefits
Salary Range: $111,000 – $140,000
Limited relocation assistance available
Full-time position
No visa sponsorship available
🚀 Overview
A leading industrial automation and systems integration organization is seeking a Controls Engineer to support large-scale automation and control system projects in Orlando, FL.
This role is responsible for full lifecycle controls engineering including:
Electrical and controls system design
PLC/DCS programming
Electrical panel design
Power calculations
Safety system implementation
Network architecture
System integration
Installation & commissioning support
The ideal candidate is a technically strong automation engineer with deep experience designing control systems from the ground up and supporting complex integrated automation environments.
🔧 Key Responsibilities
Control System Design & Engineering
Design complete control systems from concept through implementation
Develop electrical/control system architectures including:
Hardware
Software
Networks
Instrumentation
Perform electrical panel design and power calculations
Select and configure control system components
Optimize hardware layouts and panel locations for system efficiency
PLC/DCS Programming
Design, develop, and implement PLC/DCS control logic
Program using:
Ladder Logic (required)
Structured Text (required)
C++ (preferred)
Visual Basic (preferred)
Develop software design documentation and operational descriptions
Implement efficient, maintainable, and scalable control code
Perform scan time analysis, processor loading calculations, and network timing analysis
Safety & Risk Analysis
Support hazard analysis development and mitigation
Design safety-critical and redundant control systems
Implement SIL/PL-rated safety systems where applicable
Ensure compliance with client standards and regulatory codes
System Integration & Commissioning
Support system integration with multidisciplinary project teams
Assist with startup, troubleshooting, and commissioning activities
Diagnose and resolve control system issues during installation and testing
Develop smart diagnostics and fault mitigation logic
Documentation & Technical Leadership
Develop detailed technical documentation including:
Schematics
Network layouts
Acceptance test plans
Maintenance plans
Descriptions of operation
Act as technical lead on projects
Mentor junior engineers, technicians, and contractors
✅ Required Qualifications
Bachelor’s degree in Electrical Engineering required
Other engineering disciplines may be considered if directly related to controls/electrical engineering
5+ years of controls engineering experience covering:
PLC programming
Electrical design
Industrial automation
System integration
Strong experience with:
Allen-Bradley and/or Siemens platforms
Ethernet-based remote I/O systems
AutoCAD
Distributed control systems
⭐ Preferred Experience
ASTM standards
Attractions or ride systems engineering
Safety engineering
Instrumentation systems
Complex motion control systems
Entertainment or manufacturing automation environments
🛠️ Technical Skills
✔ Controls Engineering
✔ PLC Programming
✔ Electrical Design
✔ Industrial Automation
✔ System Integration
✔ AutoCAD
✔ Ladder Logic
✔ Structured Text
✔ Allen-Bradley
✔ Siemens
✔ Ethernet/IP Networks
✔ Risk Assessment
✔ Commissioning & Startup Support
🎯 Ideal Candidate
Strong hands-on controls engineer capable of designing systems from scratch
Experienced in large-scale automation projects and complex integrated systems
Comfortable working in multidisciplinary engineering environments
Skilled at troubleshooting, commissioning, and optimizing industrial control systems
Strong communicator with technical leadership capabilities
Able to thrive in fast-paced industrial and construction environments
📋 Additional Details
Up to 30% travel required (typically closer to 10%)
Must be able to support off-shift commissioning activities as needed
Position involves work in:
Office environments
Industrial facilities
Construction sites
Physical requirements include lifting, climbing, equipment access, and extended computer usage
🌟 Why Join
Work on cutting-edge automation and systems integration projects
Exposure to large-scale industrial and entertainment automation systems
Opportunity to lead technically complex engineering initiatives
Collaborative engineering environment with growth potential
High-impact role supporting advanced automation technologies
Senior Electrical & Controls Engineer – PLC, Automation, Capital Projects | Hybrid USA (Travel Required)
Senior Electrical & Controls Engineer
📍 Location: Multiple U.S. Locations (must be near a manufacturing site)
🏠 Work Model: Hybrid (flexibility when not traveling)
💼 Employment Type: Full-Time
🎓 Education: Bachelor’s Degree in Electrical Engineering required
📈 Experience Level: Mid-Senior
🕒 Experience Required: 5–7+ years
✈️ Travel: 50–75% (North America)
🌎 Visa Sponsorship: Not available
🚚 Relocation Assistance: Possible
Role Overview
We are seeking a Senior Electrical & Controls Engineer to lead and support capital projects across multiple manufacturing facilities.
This role is responsible for delivering end-to-end electrical and control systems engineering, from concept and design through installation, commissioning, and handover. You will play a key role in executing large-scale industrial projects and ensuring systems are safe, efficient, and aligned with operational goals.
Key Responsibilities
Capital Project Delivery
Lead electrical and controls engineering for capital projects ($1M–$15M range)
Develop:
Scope documents
Engineering designs and calculations
Cost estimates and schedules
Technical specifications
Manage projects from concept through execution, commissioning, and handover
Electrical & Controls Engineering
Design and implement:
Power distribution systems
Control systems and automation solutions
Specify and source equipment such as:
Switchgear, transformers, MCCs
Drives, PLCs, HMIs, relays, circuit breakers
Perform electrical system analysis and calculations
Ensure compliance with industry standards and safety requirements
Project & Contractor Management
Lead and coordinate:
External engineering consultants
Vendors and suppliers
Installation contractors
Manage procurement lifecycle from RFQs to installation and warranty support
Oversee commissioning, startup, and training for plant teams
Manage change control (MOC) processes
Safety & Compliance
Apply and promote NFPA 70E electrical safety standards
Lead safety initiatives related to electrical and control systems
Ensure all systems meet required regulatory and operational standards
Cross-Functional Collaboration
Partner with:
Operations
Maintenance
Engineering teams
Procurement and project management
Provide subject matter expertise (SME) on electrical and controls systems
Support both plant-level projects and enterprise initiatives
Project Ownership (Controls-Focused Projects)
Take full ownership of smaller projects (typically <$5M)
Act as Electrical & Controls Lead on larger initiatives
Manage:
Budgets and forecasts
Schedules and deliverables
Stakeholder communication
Required Qualifications
Bachelor’s degree in Electrical Engineering
5+ years of experience in controls/electrical engineering within manufacturing
Strong experience with:
Control systems and automation technologies
Electrical system design
Hands-on expertise with:
Allen-Bradley PLCs and HMIs (including programming)
Proficiency in AutoCAD
Demonstrated experience managing capital projects ($500K–$2M+)
Strong analytical, problem-solving, and communication skills
Preferred Qualifications
Experience with:
480V and 4160V power distribution systems
MCCs, switchgear, and industrial power systems
Background in continuous and/or discrete manufacturing environments
Experience managing multi-site or large-scale industrial projects
Key Competencies
Strong project management and execution skills
Ability to manage multiple projects simultaneously
Proven ability to influence cross-functional teams
High level of initiative and ownership
Strong collaboration with internal and external stakeholders
Ideal Candidate
The ideal candidate will:
Have strong experience delivering electrical and controls projects in manufacturing environments
Be comfortable acting as both:
Technical expert (E&C lead)
Project owner (for smaller projects)
Thrive in a hands-on, plant-facing role
Be capable of managing complex, multi-site capital projects
Be open to frequent travel (50–75%)
Screening Questions
Do you hold a Bachelor’s degree in Electrical Engineering?
Do you have project engineering or project management experience?
Are you open to travel (40–60%+)?
Additional Information
This role supports a high volume of active and upcoming capital projects
Acts as a critical technical resource across multiple manufacturing facilities
Opportunity to lead impactful projects driving operational performance and growth
Controls & Automation Engineering Jobs – PLC, SCADA, DCS | Multiple U.S. Locations
Controls & Automation Engineering Opportunities (Multiple Locations)
Industry: Industrial Automation
Education: Bachelor’s Degree in Engineering or related technical discipline
Visa Sponsorship: Not available
Relocation Assistance: Limited assistance available for some roles
A growing engineering organization is seeking Controls & Automation Engineers at multiple experience levels to support industrial automation and control system projects across the United States.
These roles involve designing, developing, programming, and commissioning control systems for industrial facilities. Engineers will work with PLC, DCS, HMI/SCADA platforms, electrical systems, and industrial networking technologies to deliver automation solutions from concept through commissioning.
Projects span industries including Life Sciences, Manufacturing, Semiconductor, Entertainment Systems, Energy, and Industrial Automation.
Open Positions
Controls Engineer
📍 Wilmington, Massachusetts
💼 Experience Required: 5+ years
💰 Compensation: $111,000 – $120,000
Key Responsibilities
Design and implement industrial control systems for machinery and process environments
Program controllers including PLC, DCS, and RTU platforms
Develop HMI/SCADA visualization systems
Configure industrial networking and field instrumentation
Develop control system documentation and technical specifications
Support system checkout, commissioning, and client startup activities
Participate in project teams delivering automation solutions
Requirements
Experience with Rockwell Automation PLC platforms
Experience with HMI/SCADA platforms such as FactoryTalk or Ignition
Knowledge of industrial protocols including EtherNet/IP, Modbus, OPC
Familiarity with instrumentation and electrical schematics
Experience working with SQL databases or industrial data systems
Ability to travel up to 25%
Senior Controls Engineer
📍 Albuquerque, New Mexico
💼 Experience Required: 10+ years
💰 Compensation: $121,000 – $130,000
Key Responsibilities
Lead engineering teams delivering automation solutions for industrial clients
Interface directly with customers to gather requirements and develop technical solutions
Develop control system architecture and system design standards
Manage project schedules, budgets, and execution plans
Oversee implementation, testing, commissioning, and qualification of automation systems
Mentor and guide junior engineers and technicians
Manage projects valued up to $1M
Requirements
Extensive experience with PLC, HMI/SCADA, and DCS platforms
Experience with platforms such as:
Rockwell Automation
Wonderware / System Platform
GE CIMPLICITY
ICONICS Genesis
Knowledge of industrial networking and system integration
Experience with SQL, .NET, APIs, or data visualization tools such as Power BI or Grafana preferred
Experience leading engineering teams
Controls Systems Design Engineer
📍 Orlando, Florida
💼 Experience Required: 5–10+ years
💰 Compensation: $111,000 – $140,000
Key Responsibilities
Design automation and electrical control systems from concept through implementation
Develop electrical panel designs and power distribution systems
Perform engineering calculations including:
Short circuit protection
Load flow analysis
Harmonics and noise analysis
Design and program PLC/DCS control systems
Create engineering documentation including schematics, network diagrams, and system descriptions
Support installation, commissioning, and troubleshooting of automation systems
Interface with vendors and project stakeholders
Requirements
Bachelor’s degree in Electrical Engineering or related discipline
Experience with AutoCAD or electrical design tools
Experience programming PLC systems and automation software
Knowledge of industrial safety systems, hazard analysis, and system reliability
Experience designing automation systems involving motion control or complex integrated systems
Ability to travel up to 30%
Senior DeltaV Engineer (Life Sciences Automation)
📍 Raleigh, North Carolina
💼 Experience Required: 10–15+ years
💰 Compensation: $151,000 – $170,000
Key Responsibilities
Lead design and implementation of Emerson DeltaV control systems for Life Sciences facilities
Develop ISA-88 batch control strategies and manufacturing automation solutions
Lead automation architecture and system integration for large capital projects
Manage project lifecycle from requirements through commissioning and validation
Develop HMI graphics using DeltaV Live and DeltaV Operate
Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT)
Ensure compliance with cGMP, GAMP5, and regulatory standards
Mentor junior engineers and technical teams
Requirements
Extensive experience with Emerson DeltaV automation systems
Experience delivering automation projects in biopharmaceutical or medical device manufacturing
Knowledge of ISA-88 batch processing and advanced control strategies
Experience with industrial networking protocols such as Ethernet/IP, Modbus TCP/IP, OPC UA
Strong understanding of regulated manufacturing environments and system validation
Additional Skills Across Roles
Candidates may have experience with:
PLC programming languages:
Ladder Logic
Structured Text
Sequential Function Chart
Industrial protocols:
EtherNet/IP
Modbus
Profibus
Foundation Fieldbus
Automation platforms such as:
Rockwell Automation
Siemens
Emerson DeltaV
Ignition
Working Environment
Combination of office, client site, and industrial environments
Travel requirements vary depending on project assignments (10–30% typical)
Senior Controls Systems Engineer – PLC, Robotics & Industrial Automation | Wisconsin
Senior Controls Systems Engineer
📍 Location: Waukesha, Wisconsin
🏢 Work Model: Primarily Onsite (flexible when needed for appointments, illness, or extreme weather)
💼 Employment Type: Full-Time
💰 Base Salary: $105,000 – $120,000
✈️ Travel: Occasional (primarily day trips to nearby facilities)
🎓 Education: Bachelor’s Degree in Engineering, Computer Science, or related field preferred
Role Overview
A leading advanced manufacturing organization is seeking a Senior Controls Systems Engineer to join its Advanced Manufacturing team.
This role focuses on designing, implementing, and scaling automation and controls systems across manufacturing operations. The engineer will develop PLC programs that interact with robotics, conveyors, machine vision, MES systems, and other automated equipment.
This position plays a critical role in improving automation capability, production quality, and operational efficiency across manufacturing sites.
Key Responsibilities
Automation & Controls Development
Design and implement automated and semi-automated control systems
Develop PLC code interacting with:
Conveyors
Industrial robots
Manufacturing Execution Systems (MES)
Machine vision systems
Third-party equipment
Build scalable and maintainable control architectures
Controls Engineering Leadership
Act as a subject matter expert for plant control systems
Mentor machine builders, automation vendors, and internal engineering teams
Lead technical direction for automation projects
Industrial Automation Programming
Architect, write, and debug PLC ladder logic and IPC software
Develop well-structured, documented, reusable code
Create intuitive HMI interfaces for complex manufacturing equipment
Manufacturing Automation Integration
Integrate controls with:
Robotics
Machine vision
Part tracking systems
MES platforms
Work with IT teams to connect manufacturing assets to enterprise networks
Machine Safety & Compliance
Implement safety systems compliant with:
ANSI
RIA
OSHA
Design and program safety PLC systems protecting robotics and automated equipment
Capital Equipment Development
Create RFQs/RFPs for automated equipment
Lead equipment design reviews and technical evaluations
Travel to supplier sites for:
Equipment validation
Factory acceptance testing
Build event support
Legacy System Modernization
Identify legacy control systems via risk assessment
Develop remediation strategies
Execute system upgrades and modernization initiatives
Required Qualifications
Bachelor’s Degree in Engineering, Computer Science, or related discipline
7+ years of experience with Rockwell Logix PLC platforms
Strong experience developing controls for automated manufacturing systems
Experience programming PLCs interacting with robotics, conveyors, and automated systems
Strong troubleshooting and debugging capability
Preferred Experience
Expert experience with:
Rockwell Logix platforms
GE RXi control systems
Experience designing controls hardware and OT infrastructure
Knowledge of industrial communication protocols
Experience designing automated manufacturing equipment specifications
Experience with:
OPC servers
Industrial historians
SCADA platforms
Industry 4.0 manufacturing systems
Experience integrating IoT platforms with factory equipment
Experience with SQL, Python, or Java
Familiarity with ERP platforms such as SAP
Experience with Fanuc robotics
Ideal Candidate Profile
The ideal candidate is a hands-on automation expert who:
Has deep experience programming Rockwell / Allen-Bradley controls
Has led automation implementations in high-volume manufacturing
Can integrate robotics, MES, vision systems, and automated equipment
Is comfortable mentoring vendors and internal engineers
Can troubleshoot complex manufacturing systems under real production conditions
Has strong problem-solving, leadership, and technical communication skills
Key Skills
PLC Programming (Rockwell Logix)
Industrial Automation
Robotics Integration
Machine Safety Systems
SCADA / Industry 4.0
Industrial Networking
MES Integration
Controls Architecture
HMI Development
Automation Project Leadership
Benefits Overview
Comprehensive health benefits (medical, dental, vision)
Retirement savings plan (401k)
Modern facility with onsite amenities
Employee engagement programs and events
Product discount programs
Strong culture focused on innovation and teamwork
Plant Automation & Control Engineer | Dayton, OH | Food Manufacturing | DeltaV & PI Historian
⚙️ Plant Automation & Control Engineer
📍 Location: Dayton, OH (On-site)
🏭 Industry: Food & Beverages / Bioindustrial Manufacturing
🎓 Education: Bachelor’s degree in Engineering or related field
💼 Experience Level: Associate / Mid-Level (2–5 years)
🚫 Visa Sponsorship: Not available
🚚 Relocation: Support available
💰 Compensation: Competitive base salary + annual bonus + full benefits
🌟 The Opportunity
Join a global leader in sustainable food and industrial manufacturing committed to nourishing the world safely and responsibly. As a Plant Automation & Control Engineer, you’ll play a vital role in optimizing plant operations through innovative automation and control solutions.
You’ll work hands-on with systems like DeltaV DCS and PI Historian, applying your technical expertise to enhance safety, reliability, and production efficiency across a highly automated facility. This is an excellent opportunity for an engineer who thrives on problem-solving, innovation, and continuous improvement in a mission-driven environment.
🧭 Key Responsibilities
Controls & Automation Engineering
Design, develop, and maintain automation and instrumentation systems to ensure safe, efficient, and reliable operations.
Provide day-to-day engineering support to optimize control system performance and plant uptime.
Apply working knowledge of DeltaV DCS and other process automation platforms to manage plant operations.
Troubleshoot automation issues, implement system upgrades, and support commissioning activities.
Process Optimization & Project Support
Support capital project execution, ensuring adherence to instrumentation and automation standards.
Collaborate with operations, maintenance, and process teams to identify improvement opportunities.
Use data from the PI Historian and other tools to track KPIs, assess system health, and recommend actionable improvements.
Contribute to the standardization and governance of control systems across the organization.
Collaboration & On-Call Rotation
Work cross-functionally with engineers, technicians, and leadership teams to deliver technical solutions.
Participate in an on-call rotation (every three weeks for remote after-hours support).
Maintain compliance with operational, safety, and environmental standards.
🎓 Qualifications
Minimum Requirements
✅ Bachelor’s degree in Engineering, Automation, Controls, or a related field (or equivalent experience).
✅ Minimum of 2 years of relevant engineering experience in automation, controls, or process engineering.
✅ Strong foundation in controls engineering principles and instrumentation systems.
Preferred Skills
⭐ Experience with DeltaV DCS systems and control programming.
⭐ Working knowledge of industrial automation technologies and process instrumentation.
⭐ Intermediate project management and problem-solving skills.
⭐ Familiarity with Lean, Six Sigma, or continuous improvement methodologies.
⭐ Strong analytical, mathematical, and technical skills.
💡 Why Join
You’ll be part of a company that connects farmers, producers, and consumers across the world — delivering essential food, agricultural, and industrial solutions with sustainability at its core. Here, your engineering expertise directly contributes to creating a safer, more efficient, and environmentally responsible future.
This role offers:
A collaborative, global team environment with mentorship and growth opportunities.
A focus on innovation and process automation in modern manufacturing.
Competitive pay, performance-based bonus, and a comprehensive benefits package.
🧩 Candidate Snapshot
Experience: 2–5 years in controls, automation, or process engineering
Education: Bachelor’s in Engineering or related discipline
Industry Background: Food & Beverage, Chemicals, Manufacturing, or Industrial Engineering
Travel: Minimal
On-Call: 1 week every 3 weeks (remote support rotation)
Ready to use your automation expertise to make a real-world impact?
Join a forward-thinking organization where technology and sustainability go hand in hand.
AWS Bedrock Developer (GenAI Engineer) | $70/hr Contract | Dallas, TX | 6-Month Project
AWS Bedrock Developer
📍 Location: Dallas, TX (Onsite)
📅 Contract Length: 6 Months
💵 Pay Rate: $70 per hour
💼 Employment Type: Contract | Mid-Senior Level
🛂 Visa Sponsorship: Not available
🚚 Relocation Assistance: Not available
👤 Openings: 1
About the Role
We are seeking an experienced AWS Bedrock Developer / GenAI Engineer with a strong background in cloud computing and generative AI. This role will focus on transforming Contact Center applications using GenAI and leveraging AWS Bedrock to deliver scalable, innovative solutions.
You’ll work hands-on with AWS services, Terraform, and automation frameworks, helping to design, integrate, and optimize cutting-edge GenAI solutions in a mission-critical environment.
Key Responsibilities
Design and implement GenAI solutions using AWS Bedrock.
Lead transformation of Contact Center applications with generative AI capabilities.
Automate server and infrastructure provisioning using Terraform.
Develop and optimize AWS Lambda functions, Step Functions, and SSO integrations.
Integrate on-premise systems with AWS Bedrock for seamless enterprise adoption.
Collaborate with cross-functional teams to deliver scalable and secure architectures.
Must-Have Skills
10+ years of IT experience.
7+ years of AWS Cloud Computing expertise.
Proven hands-on experience with AWS Bedrock for GenAI solutions.
Strong experience with Terraform for infrastructure as code.
Expertise in AWS Lambda, Step Functions, and SSO integrations.
Experience integrating on-premise systems with AWS Bedrock.
Ideal Candidate Profile
Bachelor’s degree in Computer Science, Engineering, or related field.
Strong technical communicator, able to work with technical and business stakeholders.
Ability to design and implement scalable, secure, and innovative AI-driven solutions.
Key Skills
AWS Bedrock | GenAI | AWS Cloud | Terraform | AWS Lambda | Step Functions | SSO Integrations | Contact Center Transformation | Cloud Automation
⚡ This role offers the chance to work at the forefront of Generative AI innovation in the enterprise space, shaping next-generation solutions for large-scale applications.
Senior DeltaV Controls Engineer | Life Sciences Automation | Raleigh, NC | $141K–$170K
Senior DeltaV Controls Engineer
📍 Location: Raleigh, NC (Onsite)
💼 Employment Type: Full-time | Mid-Senior Level
💵 Compensation: $141,000 – $170,000 (based on experience)
🛂 Visa Sponsorship: Not available
🚚 Relocation Assistance: Not available
👤 Openings: 1
About the Role
We are seeking a Senior DeltaV Controls Engineer to lead the design, implementation, and management of large-scale automation projects within the Life Sciences industry. This position requires deep technical expertise in Emerson DeltaV systems, strong knowledge of cGMP-compliant solutions, and the ability to deliver projects through their full lifecycle.
The ideal candidate will be a hands-on technical leader with extensive experience in automation, industrial networking, and regulatory compliance, while also mentoring junior engineers and collaborating with cross-functional teams.
Key Responsibilities
Lead the design and implementation of DeltaV control systems for complex Life Sciences projects.
Develop and manage project schedules, budgets, and resources to ensure on-time, on-budget delivery.
Design batch sequencing, phase logic, and recipe structures to optimize efficiency and compliance.
Develop DeltaV graphics using DeltaV Live and DeltaV Operate in alignment with ISA-101 guidelines.
Drive standardization with a class-based design approach across projects.
Specify, procure, and integrate instrumentation, hardware, and industrial networking solutions (Ethernet/IP, Modbus TCP/IP, Profibus, Foundation Fieldbus, OPC UA).
Define and plan DeltaV licensing requirements for cost-effective, scalable system deployment.
Ensure compliance with GAMP5, cGMP, and 21 CFR Part 11 regulatory standards.
Manage Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT).
Provide technical leadership and mentorship to junior engineers and teams.
Collaborate with stakeholders, regulatory bodies, and clients to ensure project success.
Troubleshoot complex automation issues and implement continuous improvements.
Travel up to 25% for commissioning and on-site client engagement.
Qualifications
Bachelor’s degree in Electrical Engineering, Control Systems, Chemical Engineering, or related field.
8–15 years of automation and control systems engineering experience, specifically in Life Sciences.
Extensive hands-on experience with Emerson DeltaV systems (DeltaV Live, DeltaV Operate).
Expertise in ISA-101 HMI design principles and ISA-88 batch processing.
Strong knowledge of industrial networking protocols (HART, Foundation Fieldbus, Profibus, Modbus, Ethernet/IP, OPC UA, IO-Link).
Experience with cGMP, GAMP5, and regulatory compliance for Life Sciences manufacturing.
Familiarity with Rockwell Automation, Siemens PCS7, Ignition, or other DCS/SCADA systems (plus).
Strong leadership and communication skills, with experience leading multi-disciplinary teams.
Why Join
Work on mission-critical Life Sciences automation projects that directly impact biopharmaceutical and medical device manufacturing.
Opportunity to lead full project lifecycles with ownership and accountability.
Be part of a collaborative, expert-driven team with continuous professional growth and development.
Key Skills
DeltaV | DeltaV Live | DeltaV Operate | ISA-101 | ISA-88 | Life Sciences | cGMP | GAMP5 | SCADA | DCS | OPC UA | Modbus | Profibus | Ethernet/IP | Batch Processing | Industrial Networking | Automation Engineering
Cloud Engineer | Azure / AWS / Google Cloud | €4,200–€5,000 p/m | Eindhoven / Randstad (Hybrid)
Cloud Engineer
📍 Location: Eindhoven area or Randstad (Hybrid – 3 days office, 2 days home)
💼 Employment Type: Full-time
💵 Salary: €4,200 – €5,000 gross per month (€54,432 – €64,800 annually)
🎯 Level: Mid-Senior | 3–5 years’ experience
About the Role
Are you ready to make an impact at leading enterprise clients in the field of Cloud technology?
As a Cloud Engineer, you’ll help organizations accelerate their digital transformation by designing, building, and optimizing cloud solutions. You’ll move seamlessly between strategic thinking and hands-on implementation, working closely with consultants and engineers to deliver innovative solutions across diverse industries.
Key Responsibilities
Analyze client challenges and translate them into practical cloud solutions.
Design and implement cloud architectures in Azure, AWS, or Google Cloud.
Automate infrastructure and application management using IaC tools and CI/CD pipelines.
Improve existing cloud environments in terms of cost, security, performance, and manageability.
Coach clients and colleagues in adopting cloud technology and DevOps practices.
Build sustainable client relationships and identify opportunities for innovation.
What We’re Looking For
Bachelor’s or Master’s degree in Computer Science, Mathematics, or Electrical Engineering.
3+ years’ experience as a Cloud Consultant or Engineer in enterprise or consultancy environments.
Deep expertise in at least one cloud platform (Azure, AWS, or Google Cloud).
Experience with cloud cost control, security, networking, and monitoring.
Strong scripting/automation skills (Terraform, ARM, Bicep, Python, or PowerShell).
Excellent communication skills and a solution-oriented, results-driven mindset.
Nice-to-Have:
Experience with infrastructure automation tools such as Chef, Ansible, or Puppet.
Knowledge of networking and storage within large-scale IT infrastructures.
Strong Dutch and English communication skills.
What We Offer
💶 Salary: €4,200 – €5,000 gross per month
🚘 Mobility budget: €600/month OR company lease car
🎁 Extras: €115 monthly expense allowance
🌴 26 vacation days
🏥 Insurance: 50% contribution to health insurance
🏦 Pension: 60% contribution to pension plan
🎯 Bonus: Performance-based, tied to personal development & team success
💻 Laptop & phone provided
🎓 Itility Academy for hard & soft skills training
🏋️ Gym access at the office
🏡 Hybrid working model (3 office days / 2 home days)
Ideal Candidate
You’re passionate about technology and thrive in dynamic environments. You can bridge the gap between business and IT, communicate complex ideas clearly, and take ownership of solutions. With proven cloud expertise and a collaborative mindset, you’ll help deliver sustainable, future-proof cloud infrastructures.
👉 Ready to push boundaries in cloud technology and accelerate digital transformation? Apply now and be part of a team that goes one step beyond.
Senior Controls Engineer | Automation & PLC Programming | Waukesha, WI | $96K–$130K + Bonus
⚙️ Senior Controls Engineer
📍 Waukesha, WI | Onsite (with office space available)
📅 Full-time | Mid-Senior Level | Engineering – Electrical
💰 Salary: $96,900 – $130,000 + Bonus Eligible
✨ Benefits: Full benefits package (Medical, Dental, Vision, Life, Retirement, PTO)
🚗 Travel: Occasional (including day trips to supplier or other U.S. sites)
🚀 About the Role
We are seeking an experienced Senior Controls Engineer to join our Advanced Manufacturing team. In this role, you’ll be responsible for designing, implementing, and scaling automated and semi-automated control systems that power high-volume manufacturing environments.
You’ll lead the development of PLC code to integrate subsystems like conveyors, robots, machine vision, MES, and third-party equipment. This role is perfect for a hands-on engineer with a passion for automation, Industry 4.0, and driving innovation in manufacturing.
🛠️ Key Responsibilities
Design and develop new or improved processes applying advanced engineering principles.
Build and maintain factory-level and machine-level control standards for internal teams and external partners.
Act as the subject matter expert for controls programming, writing/debugging PLC ladder logic and IPC software with organized, maintainable, and reusable code.
Implement ANSI/RIA/OSHA-compliant control-reliable safety systems for robots, gantries, and conveyors.
Design user-friendly HMI screens for complex machinery.
Partner with IT to connect manufacturing assets to enterprise networks.
Lead supplier engagements: create RFQs, participate in design reviews, and oversee machine acceptance testing.
Travel to supplier sites for equipment qualification and support build events.
Support legacy controls remediation through risk assessment and upgrades.
Mentor teams, drive process improvements, and act as a technical resource across engineering.
🎯 Required Qualifications
Bachelor’s degree in Engineering, Computer Science, or related discipline.
7+ years of experience with Rockwell Logix.
✅ Preferred Qualifications
Expertise designing, programming, and validating controls in high-volume automated manufacturing (Rockwell Logix, GE RXi).
Strong knowledge of Industrial Communication Protocols and controls hardware/OT infrastructure.
Hands-on experience with machine safety circuits, safety PLCs, and automation systems.
Exposure to SCADA, Industry 4.0 platforms, OPC servers, and Historians.
SQL and scripting knowledge (Python/Java a plus).
Familiarity with Fanuc robotics and ERP systems (SAP preferred).
Strong communication skills in global/technical environments.
💡 Skills & Attributes
Works independently while providing mentorship to less experienced engineers.
Strong conceptualization, visualization, and problem-solving skills.
Ability to manage multiple projects, prioritize effectively, and deliver results.
Experience improving financial and operational performance through engineering activities.
Collaborative leader who can influence cross-functional teams.
📌 Interview Process
Recruiter screen
Hiring manager interview
Technical deep-dive interview
Final onsite with cross-functional stakeholders
🏆 Why Apply?
This is a high-impact role where you’ll help shape the future of advanced manufacturing and automation. If you’re passionate about solving complex automation challenges, working with cutting-edge robotics and controls systems, and driving efficiency across production, this role offers the platform to make a real difference.
PLC Programmer | Boyertown, PA | Packaging & Containers | Hybrid Work
Job Title: PLC Programmer (Quality Manufacturing IT)
Experience Level: Mid-Senior
Location: Boyertown, Pennsylvania (Hybrid)
Industry: Packaging and Containers
Work Arrangement: Hybrid (on-site and remote flexibility)
Job Type: Contract
Total Openings: 2
Visa Sponsorship: Not available
Relocation Assistance: Not provided
Pay Rate: $60 per hour – 6 month contract
Note: Do not include pay if posting externally.
Job Overview
A skilled PLC Programmer is sought to design, program, test, and maintain Programmable Logic Controller (PLC) systems within a plastics manufacturing environment. The ideal candidate will play a key role in industrial automation processes, ensuring the efficient and reliable operation of manufacturing equipment and systems.
Key Responsibilities
Develop and maintain PLC programs to support automated machinery and processes
Design and implement control systems tailored to plastics manufacturing
Troubleshoot and configure PLC hardware and software (Allen-Bradley, Siemens, Schneider Electric, etc.)
Perform testing, debugging, and validation of PLC systems to ensure functionality and safety
Collaborate with engineers and technicians to integrate PLCs with broader control systems
Provide technical support to production and maintenance teams on control-related issues
Maintain detailed records of PLC configurations, programs, and system modifications
Stay informed on industry advancements, technologies, and best practices in automation
Required Qualifications
Associate’s degree in Electrical Engineering, Computer Engineering, or related field (or equivalent work experience)
Minimum 5 years of hands-on experience in PLC programming and control systems
Proficiency in ladder logic, structured text, and/or function block diagram programming
Strong knowledge of control systems in a plastics manufacturing setting
Ability to interpret schematics, technical drawings, and wiring diagrams
Excellent problem-solving skills and high attention to detail
Effective communication and teamwork capabilities
Preferred Skills
Experience with HMI/SCADA systems
Familiarity with Modbus, Python, Raspberry Pi integration for automation
Experience with IQMS/Delmia ERP systems
Prior work experience in the plastics or packaging manufacturing industry
Performance Metrics
Timely and effective completion of Quality Manufacturing IT goals
Positive attitude and collaborative approach with team members and supervisors
Responsiveness and effectiveness in resolving control system issues
Ability to adapt to new systems, technologies, and continuously improve processes
Contribution to overall IT efficiency and user satisfaction in manufacturing operations
Specialist, Automation or Sr Engineer, Automation - Saint Joseph, MO - $75,000 - $130,000
Specialist, Automation or Sr Engineer, Automation - Saint Joseph, MO
Full-Time, Permanent
$75,000 - $130,000
Description
Principal Automation Engineer / Senior Engineer, Automation
This role involves leveraging advanced expertise in automation engineering, particularly with Allen Bradley systems, and troubleshooting within the Rockwell platform. Core responsibilities include working with PLCs, AVEVA system platforms, HMIs, AB panel views, and a variety of automation communication protocols such as Ethernet/IP. You will also handle automation integration principles, cascade controls, and electrical troubleshooting in both low and high-voltage PLC control panels.
Key aspects include:
Applying knowledge of Allen Bradley PLCs and AVEVA System platforms for process integrations, including MES machine integration.
Collaborating with engineering, maintenance, and manufacturing teams to optimize equipment performance.
Supporting continuous improvement initiatives and providing hands-on troubleshooting for various production and utility systems.
The role requires proficiency in systems used in upstream and downstream processes, including antigen fermentation, CIP/SIP, WFI, filling, and lyophilization automation. Additional tasks include conducting training on utility equipment and entering maintenance work orders to ensure timely repairs and upgrades.
Duties and Responsibilities
Troubleshoot and resolve issues across Allen Bradley systems, automation communication protocols, and PLC control panels.
Provide technical support during off-shift and weekend hours as needed.
Identify and recommend equipment upgrades to improve reliability and performance.
Assist with packaging engineering projects and provide training on electro-mechanical systems.
Maintain compliance with applicable regulatory standards (e.g., cGMP, FDA, OSHA) and internal SOPs.
Stay updated on emerging technologies and best practices in automation and engineering.
Qualifications
Principal Engineer, Automation:
Bachelor’s or Associate degree in Engineering (Chemical, Mechanical, Electrical) or related field preferred, with at least 4 years of professional experience.
Alternatively, 6 years with a relevant Associate degree or 8 years with a HS diploma/GED.
Senior Engineer, Automation:
HS diploma/GED and 7+ years of relevant experience, or 2 years of experience with a relevant Bachelor’s degree.
Additional Requirements:
Proficiency in troubleshooting automation communication protocols, electrical prints, and integration principles.
Familiarity with working in a cGMP or similar regulated environment.
Must be 18 years or older, authorized to work in the U.S., and willing to undergo pre-employment screenings.
Compensation and Benefits
Principal Engineer: Base salary typically between $95,000 and $130,000.
Senior Engineer: Base salary typically between $75,000 and $95,000.
Both roles offer full health and wellness benefits, performance-based bonuses, and shift differentials.
This opportunity emphasizes a focus on growth, collaboration, and maintaining the highest standards of operational excellence.